RanerisThe Superyacht Magazine
DE

Advertising

From the houses: Werft 52

Refit at Werft 52: a boat rebuilt around its owner

Too slow, too loud, a bathing platform too narrow: on the Swiss shore of Lake Constance, Werft 52 AG renovates boats in steel, GRP and wood, from new wiring to a complete overhaul, with its own boatbuilder and boat painter on site.

Yacht Management5 min read
Two rudder blades with a fresh black coating on a stand in the yard hall, a worker walking past in the background
Photo: Werft 52

Not every owner wants a new boat. Many want their own boat, only better: faster, quieter, easier to live with. At Werft 52 on the Swiss shore of Lake Constance that is called a refit, and the yard defines it plainly as the renovation of a yacht entirely to the wishes of its owner.

From the wiring to the whole boat

A refit can be partial, touching only the electrics for instance, or it can be a complete overhaul. Werft 52 AG has carried out such work in steel, in GRP and in wood, and lists more than 15 refit projects and more than 8 restorations. Steel yachts in particular have long been a speciality of the house, which has been the place to go for yachts on Lake Constance for more than 40 years.

Almost anything is possible, from a technical upgrade to aesthetic refinement.

Werft 52 on refit and conversions (translated)

What owners want changed

The questions the yard puts to owners read like a logbook of small annoyances. A yacht that is too slow. Switchgear that has aged. A boat that cannot make headway against the current of a river, or against wind and waves. A fresh water pump that is too loud every time a tap is opened, toilets that are too loud, a canopy that is a nuisance to close, fenders that get in the way when they are stowed.

Then the things that only become obvious after a season on board: no door to the bathing platform, an awkward stair up to the aft deck, a bathing platform that is simply too narrow. None of these is a reason to sell a boat, and each of them is a job for a yard. Owners are invited to bring exactly that kind of list, and the house promises a fitting solution for it.

A worn rudder blade beneath a dark hull in the yard, with patches of old coating and rustA corroded screw with its washer against a yellow painted surface
Before the work: a rudder blade beneath the hull, and corrosion on an old fastening. Photo: Werft 52

Everything under one roof

What makes such work manageable is what stands on the site. Werft 52 has its own boatbuilder and its own boat painter directly on the premises, a crane for up to 20 tonnes, a transport system for moving boats around the yard, and service technicians for Mercruiser, Mercury, Volvo Penta, Steyr and Nanni engines, with access to the Volvo Penta parts range. In Kreuzlingen the yard also has its own mast crane.

The workshops come to 800 square metres, heated, across the two sites: 350 in Romanshorn, the headquarters with its focus on motor boats, and 450 in Kreuzlingen, the branch for sailing boats. Five apprentices are currently training there as boatbuilders and boat service technicians, so the trade that a refit depends on is learnt in the same halls.

Quieter, and sometimes electric

One kind of refit suits Lake Constance particularly well. Werft 52 converts boats to electric drive, retrofits them and services them, and as a dealer for ePropulsion and Mercury Avator it carries the electric outboards for smaller boats in its own range.

Knowing what the boat is worth

Before a large refit, many owners want to know where they stand. André Vrecer, owner of Werft 52 AG, works as a technical boat surveyor: he assesses and values damage, prepares damage reports as well as purchase and valuation reports, and supports owners in settling a claim. For a boat that may be sold one day, the yard also offers valuations according to the guidelines of the DESAG.

What we would add

The quiet months are the natural time for a refit. A boat that is hauled out in autumn and goes into the hall can be worked on until it is launched in spring, so the list of jobs belongs on the table before the hall closes, not in March.

Before you talk to the yard about a refit

Contact

Werft 52 AG

Romanshorn

Headquarters, motor boats

Friedrichshafnerstrasse 52
8590 Romanshorn
+41 71 463 55 22

Kreuzlingen

Branch, sailing boats

Sonnenwiesenstrasse 24
8280 Kreuzlingen
+41 71 688 64 84
On call around the clock
+41 71 552 04 74
Opening hours
Monday to Friday 08.00 to 12.00 and 13.00 to 17.00. In July and August 08.00 to 12.00 by appointment, closed from 12.00. Appointments outside opening hours by arrangement over the phone.

At a glance

House
Werft 52 AG, Romanshorn and Kreuzlingen, canton of Thurgau
Refit
Partial or complete, in steel, GRP and wood
Track record
More than 15 refit projects and more than 8 restorations
On site
Own boatbuilder and boat painter, crane up to 20 tonnes, transport system
Engines
Service for Mercruiser, Mercury, Volvo Penta, Steyr and Nanni
Electric
Conversions, retrofits and service
Surveys
Damage, purchase and valuation reports by André Vrecer

Use it now

Running Cost Model

What a yacht of a given length actually costs in a year, line by line.

Open the instrument

Read next

The refit yearYacht ManagementAI generated

The refit year

Every five years the boat comes out of the water and is opened up. The invoice is the largest of the ownership, and it is entirely predictable.

9 min read

The Log

One entry a week, on a Saturday.

One entry a week: the new long read, one boat worth studying, one number worth knowing. No advertising, no tracking, one click to leave.